Steering

The mobility scooter might have a steering column that is too long or too short. If it is too long, cut it to the required length and weld on a horizontal piece of 20mm square tube, if it is too short, extend it and weld on a piece of horizontal steel.

In the photo below, the original handle bars were removed, the steering column was cut to a suitable length and the original handle bars were welded back on.

Steering example 1

In the photo below, the original handle bars were removed, the steering column was cut to a suitable length and a piece of 20mm square steel tube (the same steel tube used for the seat frame) was welded as handle bars.

Steering example 2

In the photo below, the steering column was cut to length and a steering wheel was made from plywood to steer the car.

Steering example 3

Electric bike throttle

If you wish to use an electric bike throttle, you will need to use round tubing to suit the throttle.